Please Choose Your Language
| Quantity: | |
|---|---|
Three phase 10-15kw digital electromagnetic heating control board adopts high-speed optocoupler drive and Infineon IGBT module. It has the characteristics of stable performance, low failure rate, long service life and remarkable energy-saving effect. Support standard Modbus RTU communication protocol. It can be widely used in plastic machinery (such as energy-saving transformation projects of injection molding machine, wire drawing machine, granulator and extruder), food machinery, crude oil transportation, heating and other similar heating industries.
working principle
An electromagnetic heater is a device that converts electrical energy into heat energy by means of electromagnetic induction. Electromagnetic controller will be 220 v / 380 v, 50/60 Hz alternating current (ac) by the rectifier circuit rectifier into direct current (dc), through the control circuit converts direct current (dc) into different frequency voltage, high-speed change of high-frequency electric current flows through the coil produces high-speed change of alternating magnetic field, When the alternating magnetic field lines in the magnetic field pass through the magnetically permeable metal (iron, cobalt, nickel) material, countless small eddy currents will be generated in the metal body. The metal material itself generates heat at a high speed, thereby achieving the purpose of heating the contents of the metal material barrel.
| Name | Performance parameter |
| rated power | 10KW/15KW Three-phase 380V |
| Rated input current | 10KW (14-15A) 15KW (20-22A) |
| Rated output current | 10KW (50-60A) 15KW (60-70A) |
| Rated voltage frequency | AC 380V/50Hz |
| Voltage adaptation range | constant power output at 300 ~ 400V |
| Adapt to ambient temperature | -20ºC~50ºC |
| Adapt to environmental humidity | ≤95% |
| Power adjustment range | 20% ~ 100% stepless adjustment(That is: adjustment between 0.5 ~ 10/15KW) |
| Heat conversion efficiency | ≥95% |
| Effective power | ≥98%(Can be customized according to user needs) |
| working frequency | 5~40KHz |
| Main circuit structure | Half-bridge series resonance |
| Control System | The DSP-based high-speed automatic phase-locking tracking control system |
| Application mode | Open application platform |
| monitor | Programmable digital display |
| start time | <1S |
| Instantaneous overcurrent protection time | ≤2US |
| Power overload protection | 130% instantaneous protection |
| Soft start mode | Fully electrically isolated soft start heating/stop mode |
| Support PID adjustment power | Identify 0-5V input voltage |
| Support 0 ~ 150 ºC load temperature detection | Accuracy up to ± 1 ºC |
| Adaptive coil parameters | 10KW 10 square line, length 30~35m, inductance 150 ~ 180uH 15KW 16 square line, length 25~30m, inductance 110 ~ 140uH |
| Coil to load distance(Thermal insulation thickness) | 20-25mm for circle, 15-20mm for the plane, 10-15mm for ellipse and within 10 mm for superellipse |
Three phase 10-15kw digital electromagnetic heating control board adopts high-speed optocoupler drive and Infineon IGBT module. It has the characteristics of stable performance, low failure rate, long service life and remarkable energy-saving effect. Support standard Modbus RTU communication protocol. It can be widely used in plastic machinery (such as energy-saving transformation projects of injection molding machine, wire drawing machine, granulator and extruder), food machinery, crude oil transportation, heating and other similar heating industries.
working principle
An electromagnetic heater is a device that converts electrical energy into heat energy by means of electromagnetic induction. Electromagnetic controller will be 220 v / 380 v, 50/60 Hz alternating current (ac) by the rectifier circuit rectifier into direct current (dc), through the control circuit converts direct current (dc) into different frequency voltage, high-speed change of high-frequency electric current flows through the coil produces high-speed change of alternating magnetic field, When the alternating magnetic field lines in the magnetic field pass through the magnetically permeable metal (iron, cobalt, nickel) material, countless small eddy currents will be generated in the metal body. The metal material itself generates heat at a high speed, thereby achieving the purpose of heating the contents of the metal material barrel.
| Name | Performance parameter |
| rated power | 10KW/15KW Three-phase 380V |
| Rated input current | 10KW (14-15A) 15KW (20-22A) |
| Rated output current | 10KW (50-60A) 15KW (60-70A) |
| Rated voltage frequency | AC 380V/50Hz |
| Voltage adaptation range | constant power output at 300 ~ 400V |
| Adapt to ambient temperature | -20ºC~50ºC |
| Adapt to environmental humidity | ≤95% |
| Power adjustment range | 20% ~ 100% stepless adjustment(That is: adjustment between 0.5 ~ 10/15KW) |
| Heat conversion efficiency | ≥95% |
| Effective power | ≥98%(Can be customized according to user needs) |
| working frequency | 5~40KHz |
| Main circuit structure | Half-bridge series resonance |
| Control System | The DSP-based high-speed automatic phase-locking tracking control system |
| Application mode | Open application platform |
| monitor | Programmable digital display |
| start time | <1S |
| Instantaneous overcurrent protection time | ≤2US |
| Power overload protection | 130% instantaneous protection |
| Soft start mode | Fully electrically isolated soft start heating/stop mode |
| Support PID adjustment power | Identify 0-5V input voltage |
| Support 0 ~ 150 ºC load temperature detection | Accuracy up to ± 1 ºC |
| Adaptive coil parameters | 10KW 10 square line, length 30~35m, inductance 150 ~ 180uH 15KW 16 square line, length 25~30m, inductance 110 ~ 140uH |
| Coil to load distance(Thermal insulation thickness) | 20-25mm for circle, 15-20mm for the plane, 10-15mm for ellipse and within 10 mm for superellipse |
