Please Choose Your Language
Model JS1300-030 (induction heating equipment) is a new generation of our company's new generation of standard industrial and commercial electromagnetic heating efficient heating experts. It is applied to loads with small load area, short length, large heating power, and high heat density. It is widely used in commercial induction cookers, mold heating, and heating. Using the company's fifth-generation digital processing platform technology, embedded 32-bit processing system, full digital phase-locked loop PWM control, has high reliability and flexibility. Its user-friendly interface makes your installation, operation, and control as flexible and convenient as playing games. New IGBT technology, powerful communication capabilities, accurate temperature control performance, and high reliability all make control a pleasure.
Characteristics of 30KW/380V induction heating equipment:
1. Energy saving and environmental protection: During the use of coal-fired boilers, a large amount of heat energy is emitted into the air, which not only reduces thermal efficiency but also causes room temperature to rise, affecting the production environment; The Jiangxin induction heater allows the metal material itself to generate heat, thereby heating the contents of the metal material barrel. It has high heating efficiency, and the heating part itself does not generate heat. The temperature is controlled at a level that can be touched by hand, creating a safe and comfortable production environment for the factory;
2. Cost reduction: The heating part of the induction heater adopts a cable structure, and the heating cable itself does not generate heat. It can withstand temperatures above 500 ℃ and has a service life of more than 5 years. There is basically no maintenance cost in the later stage. And induction heating is achieved by automatically heating the material barrel through electromagnetic induction, which can fully and uniformly heat the raw materials, with a heat utilization rate of over 95%, thereby improving product quality and reducing production costs;
3. Fast heating speed and good heating effect: The metal barrel directly generates heat through magnetic induction, and the heating speed is fast. For example, the heating device of a regular injection molding machine usually takes more than 40 minutes from start-up to normal operation, while the induction heater can reach the required temperature for production in just over ten minutes, greatly saving pre production time and improving production efficiency. Secondly, a layer of insulation material can be wrapped around the plastic mechanical material barrel, which has good thermal insulation properties, reducing the surface temperature of the barrel to 60-70 degrees and achieving a heat utilization rate of over 95%.
Name | Performance parameter |
| rated power | Three-phase 30KW |
| Rated input current | 40-45(A) |
| Rated output current | 40-70(A) |
| Rated voltage frequency | AC 380V/50Hz |
| Voltage adaptation range | constant power output at 300 ~ 400V |
| Adapt to ambient temperature | -20ºC~50ºC |
| Adapt to environmental humidity | ≤95% |
| Power adjustment range | 20% ~ 100% stepless adjustment(That is: adjustment between 0.5 ~ 30KW) |
| Heat conversion efficiency | ≥95% |
| Effective power | ≥98%(Can be customized according to user needs) |
| working frequency | 5~40KHz |
| Main circuit structure | Full bridge series resonance |
| Control System | The DSP-based high-speed automatic phase-locking tracking control system |
| Application mode | Open application platform |
| monitor | Programmable digital display |
| start time | <1S |
| Instantaneous overcurrent protection time | ≤2US |
| Power overload protection | 130% instantaneous protection |
| Soft start mode | Fully electrically isolated soft start heating/stop mode |
| RS485 communication | Modbus RTU standard communication protocol |
| Support PID adjustment power | Identify 0-5V input voltage |
| Support 0 ~ 1000 ºC load temperature detection | Accuracy up to ± 1 ºC |
| Adaptive coil parameters | 10 square line, length 60m, inductance 250 ~ 300uH |
| Coil to load distance(Thermal insulation thickness) | 20-25mm for circle, 15-20mm for a plane, 10-15mm for ellipse and within 10 mm for superellipse |
Model JS1300-030 (induction heating equipment) is a new generation of our company's new generation of standard industrial and commercial electromagnetic heating efficient heating experts. It is applied to loads with small load area, short length, large heating power, and high heat density. It is widely used in commercial induction cookers, mold heating, and heating. Using the company's fifth-generation digital processing platform technology, embedded 32-bit processing system, full digital phase-locked loop PWM control, has high reliability and flexibility. Its user-friendly interface makes your installation, operation, and control as flexible and convenient as playing games. New IGBT technology, powerful communication capabilities, accurate temperature control performance, and high reliability all make control a pleasure.
Characteristics of 30KW/380V induction heating equipment:
1. Energy saving and environmental protection: During the use of coal-fired boilers, a large amount of heat energy is emitted into the air, which not only reduces thermal efficiency but also causes room temperature to rise, affecting the production environment; The Jiangxin induction heater allows the metal material itself to generate heat, thereby heating the contents of the metal material barrel. It has high heating efficiency, and the heating part itself does not generate heat. The temperature is controlled at a level that can be touched by hand, creating a safe and comfortable production environment for the factory;
2. Cost reduction: The heating part of the induction heater adopts a cable structure, and the heating cable itself does not generate heat. It can withstand temperatures above 500 ℃ and has a service life of more than 5 years. There is basically no maintenance cost in the later stage. And induction heating is achieved by automatically heating the material barrel through electromagnetic induction, which can fully and uniformly heat the raw materials, with a heat utilization rate of over 95%, thereby improving product quality and reducing production costs;
3. Fast heating speed and good heating effect: The metal barrel directly generates heat through magnetic induction, and the heating speed is fast. For example, the heating device of a regular injection molding machine usually takes more than 40 minutes from start-up to normal operation, while the induction heater can reach the required temperature for production in just over ten minutes, greatly saving pre production time and improving production efficiency. Secondly, a layer of insulation material can be wrapped around the plastic mechanical material barrel, which has good thermal insulation properties, reducing the surface temperature of the barrel to 60-70 degrees and achieving a heat utilization rate of over 95%.
Name | Performance parameter |
| rated power | Three-phase 30KW |
| Rated input current | 40-45(A) |
| Rated output current | 40-70(A) |
| Rated voltage frequency | AC 380V/50Hz |
| Voltage adaptation range | constant power output at 300 ~ 400V |
| Adapt to ambient temperature | -20ºC~50ºC |
| Adapt to environmental humidity | ≤95% |
| Power adjustment range | 20% ~ 100% stepless adjustment(That is: adjustment between 0.5 ~ 30KW) |
| Heat conversion efficiency | ≥95% |
| Effective power | ≥98%(Can be customized according to user needs) |
| working frequency | 5~40KHz |
| Main circuit structure | Full bridge series resonance |
| Control System | The DSP-based high-speed automatic phase-locking tracking control system |
| Application mode | Open application platform |
| monitor | Programmable digital display |
| start time | <1S |
| Instantaneous overcurrent protection time | ≤2US |
| Power overload protection | 130% instantaneous protection |
| Soft start mode | Fully electrically isolated soft start heating/stop mode |
| RS485 communication | Modbus RTU standard communication protocol |
| Support PID adjustment power | Identify 0-5V input voltage |
| Support 0 ~ 1000 ºC load temperature detection | Accuracy up to ± 1 ºC |
| Adaptive coil parameters | 10 square line, length 60m, inductance 250 ~ 300uH |
| Coil to load distance(Thermal insulation thickness) | 20-25mm for circle, 15-20mm for a plane, 10-15mm for ellipse and within 10 mm for superellipse |
